We've got a slight problem with our incoming faxes, they all 'bleed' a little bit. Not much, it's mostly just one line per page, but still anoing. please help..
dial-peer voice 1674 voip
destination-pattern 1674
progress_ind setup enable 3
progress_ind progress enable 8
session target ipv4:192.168.1.250
incoming called-number [0-9]
dtmf-relay h245-signal
codec g711ulaw
fax-relay ecm disable
fax rate 9600
fax nsf 000000
fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback cisco
no vad
!