I have a situation that I am trying to solve. We have lot of services trough ACE, but now I have to modify one of them, PROXY servers. I have six (6) servers working with Sticky, but with a MASK 255.255.255.0, which produce an unbalanced situation some times, and that affect some servers on depending of how many users connected to that server. We have between 40K and 50K conns in that serverfarm, but in Sticky terms we have arround 700 /24 subnets.
I want to modify the configuration, specificaly the MASK to 255.255.255.255, which is going to increase a lot Sticky resources. But thinking in optimize Sticky resources, I want to know if there is a way to select only e-commerce, Home Banking or other kind of SSL/TSL traffic (always using port 80 trough proxy servers), so I could use Sticky only for connections that need it, and leave other HTTP traffic without this feature.
I´m sorry, may be I'm doing a silly question, but don´t have the experience to make this configuration, and I will apreciate your help.
Webcast: Evolution of Data Center: From Classic Ethernet to VXLAN
(Live Webcast Tuesday May 15, 2018 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
Register today for this live Cisco Support Community webcast.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the troubleshooting checklist which should be ready before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)