I have a Cisco ASR 1001 with Redundant power supplies. Scenario is switch off module 1. Router runs OK on module 0 and when rebooted comes back up OK on module 0. Turn module 1 back on and turn module 0 off. Router runs OK on module 1 but when rebooted WONT come back up on module 1. Any ideas? PSU has been changed out in module 1 but behaviour remains the same.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...