Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

can we use SVI as peer link on 5K?

can we use SVI as peer link on cisco Nexus5548 Chassis?

? or only management interface will work?

If we can use SVI can we use the switch-profile?

If yes we are having the problem with switch-profile syncronization and we are using the SVI as peer link.

switch-profile  : 5kpeer

----------------------------------------------------------

Start-time: 253279 usecs after Thu Aug 29 07:54:08 2013

End-time: 447786 usecs after Thu Aug 29 07:54:10 2013

Profile-Revision: 15

Session-type: Commit

Session-subtype: -

Peer-triggered: No

Profile-status: Sync Success

Local information:

----------------

Status: Commit Success

Error(s):


Peer information:

----------------

IP-address: 1.1.1.10

Sync-status: Not yet merged

Merge Flags: pending_merge:1 rcv_merge:0 pending_validate:0

Status: Peer not reachable

Error(s):

Same is the output for another switch

sh run vpc

!Command: show running-config vpc

!Time: Thu Aug 29 08:13:03 2013

version 5.0(3)N2(1)

feature vpc

vpc domain 4

  role priority 100

  peer-keepalive destination 1.1.1.10 source 1.1.1.9 vrf KEEPALIVE

  peer-gateway

interface port-channel10

  vpc peer-link

interface port-channel31

  vpc 31

interface port-channel101

  vpc 101

interface port-channel102

  vpc 102

Please suggest the next step

Thanks

Pawan


Everyone's tags (4)
1 REPLY
Cisco Employee

can we use SVI as peer link on 5K?

Please follow thee steps to configure vPC on Cisco 5000 Series Switch 1 shown in Figure 4.

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/configuration_guide_c07-543563.html

Hope this may helful to you

1073
Views
0
Helpful
1
Replies
CreatePlease to create content