We are planning to migrate our Data Center. For simplicity we are taking into consideration DC interconnect option, and for DCI we are planning to use VPLS, we are taking 2 VPLS link of 100 mbps each and connecting directly to 3750 internal core switches as we dnt have 3750 Metro Ethernet switches
Also do 3750 E series will work in this case as we dnt have 3750 ME switches,or 6500 or ASR 1k as of now with us?
Also is the BW taken (200 mpbs) is enough for this DCI approach?
Planning to run trunk directly by connecting the VPLS link to internal 3750 E switch and allowing Vlans statically for layer 2 reachability between two DC on the VPLS link.Also do this approach work or we must need a layer 3 interface at both end of VPLS link and then we enable routing in between our local Vlans and layer 3 /30 interface on 3750 switch.
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...