I've got a problem that I am not able to figure out.
I've got 2 nexus 5020 running
system: version 5.0(2)N2(1)
system image file is: bootflash:/n5000-uk22.214.171.124.N2.1.bin
cisco Nexus5020 Chassis ("40x10GE/Supervisor")
I use Nagios for management and so far, everything is working fine. Since a couple of days, I was thinking to install dcnm 6.1.1a on a red hat linux to test the app and see what can I do with the nexus. The problem is that every time that I try to work with the DCNM app, the CPU goes up a lot.
Just to close this thread, we saw that the average cpu utilization is 10%. The CPU spikes might be due to the polling time or some cosmetic output. There is no output error, no discards, no traffic loss.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...