Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

EIGRPV6 - NEXUS

HI I need your help, to configure EIGRPV6 on Nexus device. I need to have a relation of neighbors between two peer, one is a IOS device and the other is a Nexus with enterprise license, but I couldn´t do it are the same requirement that in EIGRPv6 for IOS?, I do need other command?, the subnet ipv6 is 2001:10:10:30::/64 NEXUS router eigrp 200 address-family ipv6 unicast autonomous-system 200 router-id 192.168.1.1 interface Ethernet1/29 no switchport speed 1000 ip address 10.10.30.1/30 ipv6 address 2001:10:10:30::1/64 ip router eigrp 200 IOS interface GigabitEthernet0/0 ip address 10.10.30.2 255.255.255.252 duplex auto speed auto ipv6 address 2001:10:10:30::2/64 ipv6 eigrp 200 ipv6 router eigrp 200 eigrp router-id 192.168.250.1 no shutdown ipv6 unicast-routing what is wron with this? thanks
  • Other Data Center Subjects
1 REPLY
New Member

guys.I could do it, my

guys.

I could do it, my problem was on interface 1/29 of Nexus.

interface Ethernet1/29
no switchport
speed 1000
ip address 10.10.30.1/30
ipv6 address 2001:10:10:30::1/64
ipv6 router eigrp 200

31
Views
0
Helpful
1
Replies
This widget could not be displayed.