We are in the process of migrating from dual 6509's to dual 7010's. We have moved our 5k/2K's behind the 7K and have layer 2 up between the 6509 and 7K. This link is configured as a port channel with 2 1gig links using LACP. The port channel is up and working and traffic is passing but it doesn't appear the load it equally distributed between the links. Both the 7K and 6K are setup for src-dst-ip for the load balancing. The links have been in place for over 12 hours and I would have expected them to "equal" out. Has anyone had this issue in or is this to be expected? For clarification there is not VPC inolved in this configuration it is simply a port-channel between one 6509 and a 7010.
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...