I have a standard server running linux (centos 6.5) with kvm to install and configure virtual machines. I tried to use macvtap driver to setup the virutal network interfaces. I not use ucs Cisco servers or Nexus 1000v switches!
The physical ethernet is connected to Cisco Nexus 2000 (with a Cisco Nexus 5548up). To default a standard switch not working with the macvtap configuration because the swith to be support "reflective relay" or "hair pinning" propierties for to this works.
Is possible configure the Cisco Nexus 5548up/2000 to this works? Capabilities how to Adapter-FEX, veheternet, VM-FEX o similars can help me?
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
==================== VIC FNIC driver does not support Virtual Volumes (
second level LUN ID ) An enhancement request has been created to track
this feature - CSCux64473 UPDATE - 12-14-2016 We made some traction on
the enhancement request - The Fix is in t...