Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Multicast Filter on Nexus 7K

I´m working with Nexus 7010 and 7018 and i need to configure a multicast filter (boundary), but i didn´t find any document whose explain how-to-do it on nexus.

If we compare multicast command from Catalys 6500, what I need to configure is the "IP Mulicast Boundary [acl]"

thanks

2 REPLIES
Cisco Employee

Multicast Filter on Nexus 7K

Hi Marcio,

The equivalent of ip multicast boundary in NX-OS is PIM Join/Prune filter:

http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/multicast/command/reference/mcr_cmds_i.html#wp1044461

Filtering applies at the control-plane level in this case.

HTH

Laurent.

New Member

Re: Multicast Filter on Nexus 7K

Thanks Laurent

Em 06/12/2011, às 03:34, laaubert escreveu:

Home

Re: Multicast Filter on Nexus 7K

created by Laurent Aubert in Other Data Center Subjects - View the full discussion

Hi Marcio,

The equivalent of ip multicast boundary in NX-OS is PIM Join/Prune filter:

http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/multicast/command/reference/mcr_cmds_i.html#wp1044461

Filtering applies at the control-plane level in this case.

HTH

Laurent.

Reply to this message by going to Home

Start a new discussion in Other Data Center Subjects at Home

2280
Views
0
Helpful
2
Replies
CreatePlease to create content