cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
6107
Views
0
Helpful
3
Replies

N2K-C2232PP-10GE || SOHMS_DIAG_ERROR & SOHMS_PS_GPIO

sridharanb
Level 1
Level 1

Hi All,

I've N2K connected to N5K in single home. We purchased GLC-T for Nexus 2k to connect the 1G servers. I observed the following error and then, the PS is showing 'absent' in the environmental output... I'm wondering whether the change in speed to 1G forced this behaviour or it is due to some other issue. Can you please suggest to proceed... Thanks

NX-OS Version 5.1(3)N1(1a)

2012 Mar 21 11:48:42 Switch last message repeated 41 times

2012 Mar 21 11:48:42 Switch %SATCTRL-FEX122-2-SOHMS_DIAG_ERROR: FEX-142 Module 1: Runtime diag detected major event: GPIO access failure

2012 Mar 21 11:48:46 Switch %SATCTRL-FEX122-4-SOHMS_PS_GPIO: FEX-121 System PS access failure on Power supply: 1

2012 Mar 21 11:48:47 Switch %SATCTRL-FEX122-4-SOHMS_PS_GPIO: FEX-121 System PS access failure on Power supply: 2

//////////////////////////////////////////////////////////////////////////////////////////////////////

Switch# sh environment fex 122

Temperature Fex 122:

-----------------------------------------------------------------

Module   Sensor     MajorThresh   MinorThres   CurTemp     Status

                    (Celsius)     (Celsius)    (Celsius)

-----------------------------------------------------------------

1        Outlet-1   71            50           33          ok

1        Inlet-1    70            55           30          ok

1        Die-1      92            75           41          ok

Fan Fex: 122:

------------------------------------------------------

Fan             Model                Hw         Status

------------------------------------------------------

Chassis         N2K-C2232-FAN        --         ok

PS-1            --                   --         absent

PS-2            --                   --         absent

Power Supply Fex 122:

---------------------------------------------------------------------------

Voltage: 12 Volts

-----------------------------------------------------

PS  Model                Power       Power     Status

                         (Watts)     (Amp)

-----------------------------------------------------

1   --                        --        --     absent

2   --                        --        --     absent

Mod Model                Power     Power       Power     Power       Status

                         Requested Requested   Allocated Allocated

                         (Watts)   (Amp)       (Watts)   (Amp)

--- -------------------  -------   ----------  --------- ----------  ----------

1    N2K-C2232PP-10GE    0.00      0.00        0.00      0.00        powered-up

Power Usage Summary:

--------------------

Power Supply redundancy mode:                 redundant

Total Power Capacity                                0.00 W

Power reserved for Supervisor(s)                    0.00 W

Power currently used by Modules                     0.00 W

                                                -------------

Total Power Available                               0.00 W

                                                -------------

//////////////////////////////////////////////////////////////////////////////////////////////////////

Switch# sh diagnostic result fex 122

FEX-122: Fabric Extender 32x10GE + 8x10G Module  SerialNo   : SSI154309SK

Overall Diagnostic Result for FEX-122  : OK

Test results: (. = Pass, F = Fail, U = Untested)

TestPlatform:

0)              SPROM: ---------------> .

1)   Inband interface: ---------------> .

2)                Fan: ---------------> .

3)       Power Supply: ---------------> .

4) Temperature Sensor: ---------------> .

Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16

Port -------------------------------------------------

       .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

Eth   17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Port -------------------------------------------------

       .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

TestFabricPorts:

Fabric 1  2  3  4  5  6  7  8

Port -------------------------

//////////////////////////////////////////////////////////////////////////////////////////////////////

Switch# sh diagnostic result module all

Current bootup diagnostic level: complete

Module 1: O2 48X10GE/Modular Supervisor  SerialNo : FOC15504VHR

  Overall Diagnostic Result for Module 1 : PASS

  Diagnostic level at card bootup: complete

  Test results: (. = Pass, F = Fail, I = Incomplete,

                 U = Untested, A = Abort)

     1) TestUSBFlash ------------------------> .

     2) TestSPROM ---------------------------> .

     3) TestPCIe ----------------------------> .

     4) TestLED -----------------------------> .

     5) TestOBFL ----------------------------> .

     6) TestNVRAM ---------------------------> .

     7) TestPowerSupply ---------------------> .

     8) TestTemperatureSensor ---------------> .

     9) TestFan -----------------------------> .

    10) TestVoltage -------------------------> .

    11) TestGPIO ----------------------------> .

    12) TestInbandPort ----------------------> .

    13) TestManagementPort ------------------> .

    14) TestMemory --------------------------> .

    15) TestFabricEngine :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   41 42 43 44 45 46 47 48

   Port ------------------------

          .  .  .  .  .  .  .  .

    16) TestFabricPort :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   41 42 43 44 45 46 47 48

   Port ------------------------

          .  .  .  .  .  .  .  .

    17) TestForwardingEngine :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   41 42 43 44 45 46 47 48

   Port ------------------------

          .  .  .  .  .  .  .  .

    18) TestForwardingEnginePort :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   41 42 43 44 45 46 47 48

   Port ------------------------

          .  .  .  .  .  .  .  .

    19) TestFrontPort :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   41 42 43 44 45 46 47 48

   Port ------------------------

          .  .  .  .  .  .  .  .

Module 2: O2 GEM with L3 ASIC  SerialNo : FOC15476X9K

  Overall Diagnostic Result for Module 2 : PASS

  Diagnostic level at card bootup: complete

  Test results: (. = Pass, F = Fail, I = Incomplete,

                 U = Untested, A = Abort)

     1) TestSPROM ---------------------------> .

     2) TestLED -----------------------------> .

     3) TestTemperatureSensor ---------------> .

     4) TestFabricEngine :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32

   Port ------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .

     5) TestFabricPort :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32

   Port ------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .

     6) TestForwardingEngine :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32

   Port ------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .

     7) TestForwardingEnginePort :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32

   Port ------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .

     8) TestFrontPort :

   Eth    1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20

   Port ------------------------------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .

   Eth   21 22 23 24 25 26 27 28 29 30 31 32

   Port ------------------------------------

          .  .  .  .  .  .  .  .  .  .  .  .

Regards,

Sri

1 Accepted Solution

Accepted Solutions

Colby Beam
Cisco Employee
Cisco Employee

Is it possible to try reseating these power-supplies? If this still does not resolve the issue, you may need to open a TAC case for this.

View solution in original post

3 Replies 3

Colby Beam
Cisco Employee
Cisco Employee

Is it possible to try reseating these power-supplies? If this still does not resolve the issue, you may need to open a TAC case for this.

Hi Colby,

Yes, we already did it and Cisco is going to RMA the box. We are yet to get the RCA for this.. Thanks for your time and efforts.

Regards,
Sri

Hi Sri,

Just wonder if there is RCA for this? Is it hardware issue or?

Thanks.

Regards,

Paul

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: