Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Nexus 5548 Layer 3 daughter card insertion

Hello there,

 

I am planning to install Nexus 5548 Layer 3 daughter card. I found the hardware removal procedure on Cisco website but it doesn't say whether it's hot plugged or not. (Since I've to remove existing L2 module so I guess the box needs to be powered off but not sure). Has anybody had the experience in doing the upgrade to share?

Thanks in advance

Regards,

Chinnawoot 

 

PS. Detail of the running system

 

Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
AUUT05TRUSDS03# show ver
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_series_home.html
Copyright (c) 2002-2014, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software are covered under the GNU Public
License. A copy of the license is available at
http://www.gnu.org/licenses/gpl.html.

Software
  BIOS:      version 3.6.0
  loader:    version N/A
  kickstart: version 7.0(1)N1(1)
  system:    version 7.0(1)N1(1)
  Power Sequencer Firmware:
             Module 1: version v2.0
             Module 3: version v2.0
  Microcontroller Firmware:        version v1.2.0.1
  SFP uC:    Module 1: v1.0.0.0
  QSFP uC:   Module not detected
  BIOS compile time:       05/09/2012
  kickstart image file is: bootflash:///n5000-uk9-kickstart.7.0.1.N1.1.bin
  kickstart compile time:  3/19/2014 14:00:00 [03/20/2014 10:09:46]
  system image file is:    bootflash:///n5000-uk9.7.0.1.N1.1.bin
  system compile time:     3/19/2014 14:00:00 [03/20/2014 13:54:43]


Hardware
  cisco Nexus5548 Chassis ("O2 32X10GE/Modular Universal Platform Supervisor")
  Intel(R) Xeon(R) CPU         with 8253860 kB of memory.
  Processor Board ID FOC172441CQ

  Device name: AUUT05TRUSDS03
  bootflash:    1966080 kB

Kernel uptime is 172 day(s), 21 hour(s), 56 minute(s), 9 second(s)

Last reset at 126063 usecs after  Wed May 21 12:35:50 2014

  Reason: Reset Requested by CLI command reload
  System version: 7.0(1)N1(1)
  Service: power-sequence cycled

plugin
  Core Plugin, Ethernet Plugin

.

.

.

.

 

AUUT05TRUSDS03# show lic usage
Feature                      Ins  Lic   Status Expiry Date Comments
                                 Count
--------------------------------------------------------------------------------
FCOE_NPV_PKG                  No    -   Unused             -
FM_SERVER_PKG                 No    -   Unused             -
ENTERPRISE_PKG                No    -   Unused             -
FC_FEATURES_PKG               No    -   Unused             -
VMFEX_FEATURE_PKG             No    -   Unused             -
ENHANCED_LAYER2_PKG           Yes   -   Unused Never       -
LAN_BASE_SERVICES_PKG         No    -   Unused             -
LAN_ENTERPRISE_SERVICES_PKG   No    -   Unused             -
--------------------------------------------------------------------------------

114
Views
0
Helpful
0
Replies