Nexus 5548 - PFMA-2-PS_HIGH_VIN message on device with DC power supply
we got following message on Cisco Nexus 5548 (NX-OS 6.0(2)N2(3)):
2014 Aug 25 06:41:11 MO-BPROD-AS-N5k-1 %PFMA-2-PS_HIGH_VIN: Input Voltage 1023 exceeded maximum threshold of 250V for Power supply 2. 2014 Oct 18 14:12:10 MO-BPROD-AS-N5k-1 %PFMA-2-PS_HIGH_VIN: Input Voltage 1023 exceeded maximum threshold of 250V for Power supply 1.
Strange thing is that power supplies at Nexus are DC (48 Volts), not an AC.
I serach at Cisco Error Message decoder and didn't find anything.
This document will provide screenshots to outline the steps to setup
TACACS+ configuration to ACI and also the configuration required on
Cisco ACS server. Please find the official Cisco guide for configuring
TACACS+ Authentication to ACI:
Is it supported or NOT supported? It's a frequently asked question.
Before APIC, release 2.3(1f), transit routing was not supported within a
single L3Out profile. In APIC, release 2.3(1f) and later, you can
configure transit routing with a single L3Out pr...
Cisco Documents are usually accurate, but when it came to the document
on Cisco APIC Signature-Based Transactions it was slightly off the mark.
This document is for those novices to API like me who cant seem to
figure out how to go about performing signat...