Nexus 5548UP - Remove N55-DL2, Install N55-D160L3-V2. Do I lose my config?
I'm preparing to remove the installed N55-DL2 layer2 I/O module from my 5548UP switch and install a N55-D160L3-V2 layer3 I/O module. Do I lose any of the switch config or is that stored in a location that is not on the N55-DL2? I have the licenses I need (including the infamous LAN_BASE_SERVICES_PKG license). I also have the install guides in hand and I'm putting together the design and task list. I'm working on getting access to a lab 5548UP, but in the meantime I'm doing as much homework as I can. thanks!
Introduction This article will help you understand the steps on how to
download the UCS licenses from the Cisco Systems website and then
installing it on the UCS. The redacted (blue lines) just covers up
certain numbers for privacy please do not take them...
Introduction This article will help you understand and educate the
customer on how to clear their "expired licenses"
(license-graceperiod-expired) from their UCS-M. If a customer just
purchased a license and needs a step by step guide on how to download
With Vignesh R. P.Welcome to the Cisco Support Community Ask the Expert
conversation.This is an opportunity to learn and ask questions of Cisco
expert Vignesh R. P. about the Cisco® Nexus 7000 Series Switches and
support for the Cisco NX-OS Software platf...