Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Nexus 5548UP with N2K-C2232TM-E-10GE

Hi All

I'm all confused not thinking the fex image download will be walk in the park

problem is my fex stuck in image download mode - N2K-C2232TM-E-10GE with Nexus 5548UP series

5548up - ios

Software

  BIOS:      version 3.6.0

  loader:    version N/A

  kickstart: version 5.1(3)N2(1)

  system:    version 5.1(3)N2(1)

  power-seq: Module 1: version v1.0

             Module 3: version v2.0

  uC:        version v1.2.0.1

2K

AUDCAN5K01# sh fex

  FEX         FEX           FEX                       FEX

Number    Description      State            Model            Serial

------------------------------------------------------------------------

100        FEX0100        Image Download  N2K-C2232TM-E-10GE   SSI16500EQE

AUDCAN5K01# sh fex   de

FEX: 100 Description: FEX0100   state: Image Download

  FEX version: 5.2(1)N1(1) [Switch version: 5.1(3)N2(1)]

  FEX Interim version: 5.2(1)N1(1)

  Switch Interim version: 5.1(3)N2(1)

  Module Sw Gen: 12594  [Switch Sw Gen: 21]

  post level: complete

pinning-mode: static    Max-links: 1

  Fabric port for control traffic: Eth1/5

  FCoE Admin: false

  FCoE Oper: true

  FCoE FEX AA Configured: false

  Fabric interface state:

    Po100 - Interface Up. State: Active

    Eth1/5 - Interface Up. State: Active

  Fex Port        State  Fabric Port

Logs:

08/14/2013 08:16:41.654096: Requesting satellite to download image

08/14/2013 08:17:12.142350: Deleting route to FEX

08/14/2013 08:17:12.147606: Module disconnected

08/14/2013 08:17:12.150391: Module Offline

08/14/2013 08:17:12.152653: Deleting route to FEX

08/14/2013 08:17:12.159784: Module disconnected

08/14/2013 08:17:12.164056: Offlining Module

keeps doing this for hours ?? what is the issue here ? can some one please shed some light on this

Thanks

Kumar

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Nexus 5548UP with N2K-C2232TM-E-10GE

Hi,

The Cisco Nexus 2232TM-E FEX is not supported in NX-OS 5.1(3)N2(1) that you're using.

Support for this model of FEX was added in NX-OS 5.2(1)N1(1a) as per note 3 of Table 2 in the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes.

You will need to upgrade the Nexus 5548 to NX-OS 5.2(1)N1(1a) or later if you want to use the 2232TM-E FEX with this Nexus 5K switch.

Regards

1 REPLY

Re: Nexus 5548UP with N2K-C2232TM-E-10GE

Hi,

The Cisco Nexus 2232TM-E FEX is not supported in NX-OS 5.1(3)N2(1) that you're using.

Support for this model of FEX was added in NX-OS 5.2(1)N1(1a) as per note 3 of Table 2 in the Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes.

You will need to upgrade the Nexus 5548 to NX-OS 5.2(1)N1(1a) or later if you want to use the 2232TM-E FEX with this Nexus 5K switch.

Regards

1149
Views
0
Helpful
1
Replies