Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus 7000 Rollback

Hello,

I just started to operate Nexus7k switches.

I'd like to get feedback on what the output of "show dif rollback-patch" command exactly means.

One thing is not clear to me...which is the meaning of distinction between the displays under !! and !.

Does anybody know the answer?

Please see the below.

switch(config)# inter e5/1
switch(config-if)# switchport
switch(config-if)# sw mod ac
switch(config-if)# sw ac vlan 100
switch(config-if)#
switch(config-if)# sh run inter e5/1

!Command: show running-config interface Ethernet5/1
!Time: Tue Jul  2 11:15:57 2013

version 6.1(3)

interface Ethernet5/1
  switchport
  switchport access vlan 100

switch(config-if)# ex
switch(config)# checkpoint ACCESS_PORT
........Done
switch(config)#
switch(config)# inter e5/1
switch(config-if)# no switchport
switch(config-if)# end
switch# sh diff rollback-patch checkpoint ACCESS_PORT run
Collecting Running-Config
#Generating Rollback Patch

!!                                                                               <------------------------------     
interface Ethernet5/1
  no switchport trunk allowed vlan 1-4094
  no switchport access vlan

  no switchport
  exit
!                                                                                <-------------------------------
interface Ethernet5/1             
no switchport

Thanks in advance!!!

390
Views
0
Helpful
0
Replies
CreatePlease to create content