08-07-2013 06:21 AM - edited 03-01-2019 07:23 AM
Hello
I'm trying to connect an HP Blade server with an N2K-B22HP-P to our Nexus 7004 but it stays in de download mode.
# sh fex
FEX FEX FEX FEX
Number Description State Model Serial
------------------------------------------------------------------------
116 FEX0116 Image Download N2K-B22HP-P FOCxxxxxxxx
# sh fex detail
FEX: 116 Description: FEX0116 state: Image Download
FEX version: 5.2(1)N1(1a) [Switch version: 6.1(4)]
FEX Interim version: 5.2(1)N1(1a)
Switch Interim version: 6.1(4)
Module Sw Gen: 12594 [Switch Sw Gen: 21]
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth3/44
Fabric interface state:
Po116 - Interface Up. State: Active
Eth3/44 - Interface Up. State: Active
Fex Port State Fabric Port
Logs:
08/07/2013 18:04:24.424401: Requesting satellite to download image
08/07/2013 18:04:46.442690: Module register received
08/07/2013 18:04:46.443233: Registration response sent
08/07/2013 18:04:46.443516: Requesting satellite to download image
08/07/2013 18:05:10.475657: Module register received
08/07/2013 18:05:10.476109: Registration response sent
08/07/2013 18:05:10.476390: Requesting satellite to download image
08/07/2013 18:05:36.703639: Module register received
08/07/2013 18:05:36.704118: Registration response sent
08/07/2013 18:05:36.704434: Requesting satellite to download image
08/07/2013 18:06:04.741774: Module register received
08/07/2013 18:06:04.742505: Registration response sent
08/07/2013 18:06:04.742628: Requesting satellite to download image
Solved! Go to Solution.
08-10-2013 12:49 AM
Hi Martin,
At this point in time the N2K-B22-HP FEX is not supported with the Nexus 7000 series switches as the parent switch. If you look at Table 2 in the Cisco Nexus B22 Blade Fabric Extender Data Sheet you'll see it only lists the following:
Cisco Nexus parent switch model or line card
Regards
08-10-2013 12:32 AM
Hi,
What procedural steps you done while an HP Blade server with an N2K-B22HP-P to Nexus 7004??
Sent from Cisco Technical Support iPhone App
08-10-2013 12:49 AM
Hi Martin,
At this point in time the N2K-B22-HP FEX is not supported with the Nexus 7000 series switches as the parent switch. If you look at Table 2 in the Cisco Nexus B22 Blade Fabric Extender Data Sheet you'll see it only lists the following:
Cisco Nexus parent switch model or line card
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: