Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Nexus 7K SNMP problem

We were running an older version of code on our Nexus 7000 (4.2) and upgraded to 5.2(4). Prior to the upgrade we were using SNMP to gather statistical information about how a specific VDC and it's associated interfaces were performing.

After the upgrade repsonses to the SNMP polling stopped working.

The devices use SNMP v2 for polling. I have checked  routing from the devices doing the polling and the source interface on the 7K is accessible (pingable). I have checked the configuration and the SNMP community string is correct.

Effectively with the exception of the upgrade nothing was changed.

Is there additional configuration required on a Nexus 7k running 5.2(4) to allow SNMP v2 polling to occur?

Thanks! - RMS

Everyone's tags (3)
930
Views
0
Helpful
0
Replies
CreatePlease login to create content