Nexus Command vs IOS Command

[Michael Davis]

I am locking down a LAN to STIG compliance.  One of the requirements is to limit the time allowed to negotiate an SSH connection to 60 seconds or less.  In IOS this is accomplished with the "ip ssh time-out 60" command.  This command does not exist in NX-OS.  What is the equivelent command for a Nexus switch?

Thanks for your help.

[gsharma4]

Hi Michael,

May i know the model number/series of the switches in which you are running this command.

Regards,

Gaurav

[Michael Davis]

They are all 5000 series.   Mostly 5596, but a few 5020s

[gsharma4]

Hi Michael,

Please find the below lnks for Nexus 5000 Series and Configuring  Secure Shell on Routers and Switches Running Cisco IOS. hope it will  help you.

http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/command/reference/rel_4_0_1a/NX5000CommandReference.html

http://www.cisco.com/en/US/tech/tk583/tk617/technologies_tech_note09186a00800949e2.shtml

Regards,

Gaurav

[jmeggers]

I have this same situation with a Nexus 9372. Is there an equivalent command for "ip ssh time-out" on the 9k platform? I haven't been able to find one. Thanks.