on this switch, do you remember copying any files created via windows/dos to the running config lately? can you paste a sample 'show interface ethernet x/y' for the port which is missing the port information in 'show int status'
Thanks. There could be an issue with line characters after copying over the config from your notepad in windows. You can refer to the following command
debug Debugging functions
debug-filter Enable filtering for debugging functions
delete Delete a file or directory
diff-clean Remove temp files created by '| diff' filters
dir List files in a directory
dos2nxos DOS to NXOS text file format converter <<<<
nexus# dos2nxos ?
bootflash: Filename to be displayed
debug: Filename to be displayed
modflash: Filename to be displayed
usb1: Filename to be displayed
volatile: Filename to be displayed
since you copy the configs frequently, you can use the dos2nxos command to convert the file to nxos first and then use the file for configuration. Right now, try to modify the config manually on the switch interfaces and see if that helps. You either readd 'description' command under the interface and check if the port starts showing up in 'show int status' or modify or repaste the entire interface config and check if that works.
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
In the Previous articles of ACI Automation, we are using Postman/Newman as the Rest API tool to automate the ACI Configuration.
In this article I’m going to discuss on usin...
One of the first steps in building your ACI Fabric is to go through Fabric Discovery. While Fabric Discovery is usually a straightforward process, there are various issues that may prevent you from discovering an ACI switch. This article wil...