How many out there are doing QoS in DC? Do you mind sharing a copy of
the QoS configuration from the switches with queuing, marking,
It really depends as today network are around 1 Gig network and The case for Quality of Service (QoS) in WANs/VPNs is largely self-evident because of the relatively low-speed bandwidth links at these Places-in-the-Network (PINs), as compared to Gigabit/Ten Gigabit campus networks, where the need for QoS is sometimes overlooked or even challenged.
It always depends on customer's requirements however with the current business and application requirement and video evolution in the enterprise networks, my first recommendation is to build end to end QoS strategy. Start with QoS application profiling (Data, Voice and Video) and then build your QoS design. I will not worry about implementation and how can I configure the QoS tools sets from Classification, Marking, policing and queuing till alter stage. Implementation will be very easy if you put you have QoS strategy.
Check out the below link on Qos configuration example:-
Moquery is the command line cousin of Vizore, it's very helpful and efficient sometimes during the troubleshooting. This article aims to provide moquery cheat sheet to the users for some most common seen scenarios.
Here is the checklist before customers/partners contact Cisco TAC:
Firmware Version of APIC and Switch
Download Switch and APIC techsupport logs
Problem description (Symptoms with details)
Business impact (eg, what kind of services...
moquery usageAPIC moquerySwitchmoquery
This document discuss a common issue observed during the VMM integration & VM workload migration to ACI fabric.
VMware Virtual machines are hosted in Cisco UCS-B seri...