Regarding this bug : Shellshock . What is the recomended software upgrade for Nexus 5000 & 7000.
It is important that the VPC and FCoE is still working, after an upgrade.
Need recommendation for following devices :
Nexus 5000 https://tools.cisco.com/bugsearch/bug/CSCur05017 All current versions of NX-OS on this platform are affected unless otherwise stated.. This bug will be updated with detailed affected and fixed software versions once fixed software is available. Exposure is not configuration dependent. Authentication is required to exploit this vulnerability.
Nexus 7000 https://tools.cisco.com/bugsearch/bug/CSCuq98748 All current versions of NX-OS on this platform are affected unless otherwise stated . Exposure is not configuration dependent. Authentication is required to exploit this vulnerability.
This bug is fixed in NX-OS versions specified below:
5.2(9a) 6.1(5a) 6.2(8b) 6.2(10) and above
Is there anyone that has some information on this ?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...