Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

require FI 6120 recovery procedure

Hi,

I am trying to add FI in existing single system to form cluster

While doing it, the new FI get failed and comming to loader prompt.

It is not showing any folders in it e.g. bootflash, lost+found etc.

If I set ip and gateway, it works temporarily.

After restating using reboot command it looses those ip details.

before the activity FI was tested and shows proper working

please guide for recovery process at this stage

Prakash

3 REPLIES
Cisco Employee

require FI 6120 recovery procedure

Hello Prakash,

If you still have the issue, please open a TAC service request as we need to load the kick start image to start the recovery process.

Padma

New Member

require FI 6120 recovery procedure

Hi Padma,

We opened case with TAC and resolved it.

All the basic files were lost.

We manualy loaded kickstart, system and UCS manager bin files to reconstruct the FI.

After making it ready we then loaded the latest FW codes, (Same as per working FI)

After complete recovery the FI was added as Subordinate member of FI cluster.

We then shut down Master FI to verify the failover.

Now everything is working fine.

Prakash

Cisco Employee

require FI 6120 recovery procedure

Prakash,

Glad to hear that it is up and running.

Thanks for sharing the resolution.

Padma

695
Views
0
Helpful
3
Replies