Resolved! MACSec not supported on N7K-F312FQ-25?
Hi All,Can any one confirm that on a N7K-F312FQ-25 SUB2E is IEEE 802.1AE MACsec not supported?thanks with any pointers.with kind regardspiotr
The content you are looking for has been archived. View related content below.
Hi All,Can any one confirm that on a N7K-F312FQ-25 SUB2E is IEEE 802.1AE MACsec not supported?thanks with any pointers.with kind regardspiotr
Hello, I am trying to test migration of switches from a legacy environment to vxlan. The vxlan is connected to Legacy 7Ks via double-sided vPC. The SVI for vlans will remain on the 7K for now. The vPC between the 7K and Border Gateway is up and on...
Dears, I need to know what is the last date to order VMware under Cisco CCW tool? BR Mohammed Ragheb
Hi I have Nexus 93180YC-Ex with nxos64-cs.10.2.6.M.binI needTraffic shaping for ip prefix that announce by bgp to uplink providerfor example announce 192.168.10.0/24 by bgpnow How can limite 192.168.10.0/24 for 120Mbpsfix 120Mbps limit by policenot i...
I was trying to integrate 2 diff EVPN VXLAN fabrics using L2 IPN.Legacy POD <----->IPN<----->New PODWhat could be the configs on the SPINE on legacy POD and L3 SW from IPN?In case I go for manual configs
HelloI have a Cisco Nexus C9336C-FX2 switch (N9K-C9336C-FX2). My NX-OS version is 10.3(2) [Feature Release] (nxos64-cs.10.3.2.F). I have a port-channel interface and I created a subinterface under my portchannel.My problem is when I send and receive ...
I have 4 nexus 9k switches.Two are at one site and two are at the other connected by a single Layer 2 fiber connection. We're planning on adding BiDi transceivers so we can have two connections like below. what i want to know is if there's a better m...
I have some second secondhand sfp modules which registered in different smart accounts. Can i use these sfp modules in my network environment, we will onboard Cisco dna center in the future, will it appear any error or warning in Dna center since the...
Hi all, I upgraded the NEXUS 3048TP-1GE to 6.0.2.U6.7. After the reboot I'm unable to access the console port. I'm connected directly with my laptop, but I can't see any output. I tried to exchange the power supplies but it didn't help. I installed ...
Hello ! I would like to know wether DCNM is compatible with Nutanix or not ? Unless I'm mistaken it seems to be nothing about this topic on the net... If someone can share the informaiton I'll be very grateful to him
This is an older set of hardware in our lab, otherwise I would opened a TAC case, hoping someone may have some ideas. One of nodes had a power issue and apparently the storage controller vm got hosed. When it boots this message comes on the console...
Hi guys, I have a nexus 7K which causes me problems at startup (Loader mode), The bootflash was empty (It was formatted by someone) with difficulty I was able to copy the kikstart and NX-OS. Now at startup it asks me to configure the password I confi...
Hi All, Nexus 7706 - Ver 7.3D Does anyone know the default command system jumbo mtu 9216 is enough to allow jumbo mtu frames on fabricpath interfaces ? or Dow we need to configure mtu 9216 on Layer two interfaces as well ? As per this document http:...
Hi All,I am planning to give DCACI exam by January next year. However when am checking on preparation material shared by cisco for self study couldn't find much reading materials. Requesting for suggestions.I already have some operational experience ...
Hi, I am running the POAP script on nexus switches but facing one issue that, POAP file downloaded successfully but unable to download the Image file from the Artifactory server.We have performed same operation multiple time it result was success. On...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-09-2024 12:41 AM | ||
01-10-2024 05:28 AM | ||
01-03-2024 02:30 AM | ||
11-24-2023 04:57 AM | ||
11-06-2023 10:31 PM |