I have taken on a old project with the following VSG design; I'm trying to figure out how i could syncronise a VSG/VNMC policy from DC1 to DC2... If there a feature to do this ? Below is my setup/layout
Each DC has its own HA VSM/VSG plus a standalone VNMC
My requirement is; if i make a policy change on VNMC/VSG in DC1, that policy should be syncronised or copied to DC2 reflecting the policy/policyset etc
Currently, i have to do that replication of the policy from DC1 to DC2 manually. My problem is there is currently no OTV DCI connectivity between the 2 DCs, i would have though that, adding the VSG Data VLAN in OTV would have sorted the problem out. Vservice setup is L2; will changing to to L3 make any difference ?
Topology & Design:
Two ACI fabrics
Stretching VLANs using OTV
Both fabrics are advertising BD subnets into same routing domain
Some BDs(or say VLANs) are stretched, but some are not.
Endpoints can move betwee...
VMware Trunk Port Group is supported from ACI version 2.1
VMM integration must be configured properly
ASA device package must be uploaded to APIC
ASAv version must be compatible with ACI and device package version
Topology &Design:Traffic flow within same fabric:Endpoint moves to Fabric-2Bounce Entry Times OutTraffic Black-holedSummarySolutionAppendix:
In the Previous articles of ACI Automation, we are using Postman/Newman a...