2610 boot failure

e.tantsura · ‎06-25-2002

Hi,

I've got a boot failure on the 2610 router.

I get only this message :

System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

It's a loop.

I can't get into rommon mode.

Any ideas ?

Thanks in advance

yusuff · ‎06-25-2002

Whatever the reason, you might have to break-in manually to enter into ROMMON.

Below is URL for different break-sequence keys depending on the OS and the terminal software you are using:-

Once you are in ROMMON, use the following URL to perform recovery;

HTH

R/Yusuf

e.tantsura · ‎06-25-2002

Hi,

Thanks a lot, I'm in ROMMON mode.

I used tftpdnld to upload an IOS image, this is the output I've got

File reception completed.

Copying file c2600-i-mz.122-10a.bin to flash.

Erasing flash at 0x60200000sectÿ

System Bootstrap, Version 11.3(2)XA3, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)

TAC:Home:SW:IOS:Specials for info

C2600 platform with 24576 Kbytes of main memory

device does not contain a valid magic number

boot: cannot open "flash:"

boot: cannot determine first file name on device "flash:"

Any ideas ?

Thanks in advance