Other Network Architecture Subjects

Inside CWW6.1, Ciscoview application works fine with a catalyst 4506, but the "Show command" and "Threshold Manager" doesn't works with this device, a message "unsupported device" is displayed. However, in the release note the catalyst 4506 (OID 1.3....

My ports are only coming up at 10M. This machine should also detect 100M. Why?

Hi there,I have a network that's comprised of 2 non-continginous /24 (65.202.119 and 65.202.69) networks and are about to have to release these two /24's back in exchange for a contingous /20. (206.113.64.0/20). I have a few questions. I guess the be...

We have one Cat6 (IOS) running 12.1, which does not have enough flash for 12.2. We want to test out 12.2 version, We used boot system tftp command. Show boot shows the boot var is correct.However after rebooting, it always straight away boot from fla...

Hi, Can I use router access list to restrict Microsoft Network Neighborhood function, but allow file & printer sharing function?Best Regards,

Hi.I want to connect 2 routers together over an ISDN BRI link (64k). I can connect; Layer 1 & 2 are working fine, however when it comes to establishing PPP i come to a hurdle.The calling router:1w3d: ISDN BR0/0: RX <- ALERTING pd = 8 callref = 0x8E...

Hi! I just got a connection for a new T1 - I installed a Cisco 2621 Router with a T1 WAN interface card and two Ethernet ports - the ISP provided me with a script to load - which assigned the outside IP address to one of the ethernet ports - but doe...

http://www.cisco.com/warp/public/556/12.html#topic6 All I want to do is run a web server behind the nat router. I turned on nat and mapped the outside ip to the ip of the web server.Do I have to use access lists or do I have to let internal users ...

Hello all, try to use SNMP NMS to get 12000-GRP interface CRC counters. is it possible ? how to ? below URL not found Mib for CRC. http://tools.cisco.com/ITDIT/MIBS/MainServlet?ReleaseSel=363&PlatformSel=6&fsSel=678 please help. thank you. Jason

Is there any tool/script that can do: 1) Discover all Cisco Switches on the Network 2) Query all the cisco switches found in 1) and see how many connected port are 10Mbps, how many are 100Mbps and how many are Gigabit 3) Generate a report that show: ...

Hi there,I have already configured to PE's using iBGP.COnsider the following ascii diagram:CE1---PE1--[MPLS-Cloud]--PE2--CE2 I suspect that it's a BGP problem:PE1#sh ip bgp neighbors BGP neighbor is 200.200.0.10, remote AS 100, internal link B...

If I login my router remotely. How to know my router is 3640 or 3640A? Are they using same IOS version?

We're using Microsoft software load balancing which uses a virtual MAC address assigned to however many boxes are participating in the load balancing cluster. This causes the switch to flood all traffic destined to the virtual MAC address to all por...

Hello ,I'm trying to connect one of the Giga port (SX) on 6509 to Foundry Switch ( ServerIron XL ---8 port ) . The Giga port on 6509 is assigned to some Vlan say Vlan 10 . I'm trying to connect this port as "UPLINK " to Foundry . The 10/100 ports in...

two questionsfirsttopology like thisR5--area2--R1--area0--R2--area1--R3--RIPv1--R4between R1,R2, the netmask is /26other parts are /24redistribute OSPF/RIP on R3now R4 can not ping the ip between R1 and R2 with /26because in area 0, no ospf summary, ...