Resolved! Binding
Hi I need to know that is it possible that we can bind BRI 0 and BRI 1 port to make a big pipe of 256 k. is yes then please help how to make it.please advise.Asim
Hi I need to know that is it possible that we can bind BRI 0 and BRI 1 port to make a big pipe of 256 k. is yes then please help how to make it.please advise.Asim
CISCOWORKS not detecting other than CISCO devices with snmp communication, devices are APC UPS, VDSL Concentrator(MRO). Not detecting PCs connected in the LAN.
my task is to manage cisco's 2948G switch using our Network Management System.I have decided to use "CISCO-STACK-MIB" for this purpose.Is my assumption correct?Switch has 48 10/100Mbps ports and 2 modular GigaEthernet ports with GBIC.But it does not ...
Hi,I want to upgrade the switches from "c3500XL-c3h2s-mz-120.5.2-XU.bin" to "c3500xl-c3h2s-mz.120-5.WC9.bin" IOS. And I can't find the minimum memory requirement for this. We got four 48 port switches with 16MB and two 24 port switches wtih 8MB RAM. ...
Can some one help me and tell me when it is best t use different topologies.And does the use of the network effect the topology e.g. if the network is used for databases can this effect witch topology that should be used etc.
Hi!I have some static nat translations in my cisco2620 like following:ip nat inside source static tcp 192.168.10.33 25 195.136.125.33 25ip nat inside source static tcp 192.168.10.34 25 195.136.125.34 25ip nat inside source static tcp 192.168.10.35 25...
Can we establish connection if one router is using DS3/E3 ATM Network Modules port and the other using a synchonous E3 WAN port.3600(E3ATMport)<->CSU/DSU<--WAN-->CSU/DSU<-- | ...
I have seen someone put this thread on other forum,but i can't settle the problem.follow is the question.The network has a Catalyst 6500 be a core switch and down link to a Catalyst 2950, and Catalyst 2950 down link to a PIX 515e firewall, as below.....
n a 7576 chassis with 2 RSP4's, I can get an FEIP2 processor (with 2 fast-E's) to recognize in the second half (slots 6-12) but not on the first half. (slots 0-5) When I slide an FEIP into slot1, here are some of the errors I get. If anybody has any ...
Hi Can i know what does the x-bar in the following stand for? WS-X6516-GE-TX= Catalyst 6500 16-port Gig/Copper Module, x-barthanks
I'm reading about ISDN and I keep seeing reference to "rotary group". I can't seem to find any explanation on what exactly this is. I can see that it seems to be a combination of B-channels, but why the term rotary. Does it move from one channel to a...
Hi,I need to filter any routes that have either originated or traversed through AS100.Which of the following method is correct ?ip as-path access-list 1 deny _100_OR do i need two statementsip as-path access-list 1 deny _100_ip as-path access-list 1 ...
Scenario;Four routers in a broadcast (ethernet) single area. Two routers are level 2 routers as they reside in two areas. Routing is working as it should. Adjacencies have formed no problem. Both of these level two routers have FR connections to a hu...
I am trying to clear up some confusion. I havea VWIC-2MFT-T1 card in my 3660 router. I have aframe circuit in one of the interfaces. The planis to have more than 1 connection through this physical interface. I know that I can do this throughthe use o...
Hi folks,I have what I am sure is a simple routing problem, but I cant see where Im going wrong in my logic.I have a Data E1 link (between 2 x 26xx's).The link provides the only connection between two small office ethernet LANs.LANa---RouterA-----E1-...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
02-20-2024 07:45 AM | ||
02-15-2024 09:08 AM | ||
02-14-2024 04:00 AM | ||
11-10-2023 09:28 AM | ||
11-09-2023 09:30 AM |