Other Network Architecture Subjects

Hi ,I have a cisco 3660 router with the IOS IP PLUS/IPSEC "c3660-jk9o3s-mz.122-5d" does the new IOS 12.3 have the same features as i could find only IP PLUS there.Regards,

Hello:I need configure policing route-map on a Interface ATM in a GSR 12008 (Engine 2), is possible that not support is feature the Engine 2. What be a solutions possible.Thank you, Guille.

While the Cisco documentation clearly states that the NM-2FE2W module is not supported by the 2600 series, would any damage to the NM take place if it is installed in a 2600 chassis (and powered up).For example, is there any power differences between...

What is the "Missed Recs" counter under NFUI means? And how to fine tune to elimate any "Missed Recs"?

hi,i have an cisco 7513 running an enterprise ios (123-1a).the router has a rsp4 and two vip2-50 modules . the first vip-module contains two fasteth portadaptersand the other vip module contains an 8-port serial port adapter and an 8-port e1-isdn po...

Quick question when most people implement QOS do they only implement on the lower capacity links like a T1 or Frame Circuit or do you use QOS on your backbone trunks mostly.

I have a real general question. I am trying to read up on this but I just want to make sure I got my stuff together. In a VTP environment do you manually configure the ports on every switch with in your VTP domain with a VLAN number or does the VTP s...

The port monitor command seems pretty straightforward but I can't seem to get it to work using a Windows 2K station running the MS network monitor utility. I would like to monitor all of the interfaces on a 2900XL switch from the interface that my W...

HelloI have a 7204 with a fast ethernet on the I/O and one PA. I would like to bridge some DEC protocols and route IP between this two interfaces. The IOS I use is 12.1(21) Desktop/Plus. I used CRB to configure bridging. When I start a ping before br...

Hi all,I have a lan with 100 systems. I have 2MB link from an ISP. I need to dedicate 25% of the 2MB link to 10 systems who are very important to me. How can i do this. I have cisco 2600 router. Please give me some examples if you can find out. Than...

Hello,Can anyone recommend a good tool for IP Address allocation/management ? I was told Cisco do one but not sure what its called.

Hi,WE have this 1700 router and past 2 weeks it has been showing bursty excessive cpu util >90% with "ip in put " process as culpritThere have been 2 observations1)This router which is used for internet and a bandwidth of 128k almost always shows alm...