I was recently given a cisco 1720 router by a client who owes me a great deal of money. I would like this router to allow use of my 7 computers ( all on a 3 com superstack hub)with my DSL modem and bell south fast access ( DSL) line. The software th...
I've been using the "debug ppp negotiation" command and the output mentions magic numbers a lot. What are magic numbers and how do they relate to the lcp negotiation parameters ?
Hello, I have a used router that I bought to study for my exams When I console to the router it gives me a password (after the router checkup) which I don't know. How do I get rid of that? Is there anything like "format" on this router? Any help is...
Is there anyway to connect two 2524s together using the FT1/T1 DSU/CSU module? If there is could you please provide me with how to pin the cable and how to configure the interface?Thank You
Does anyone know about any design documentation to big (more than 20 nodes) igx networks? And about wan atm nodes ? Some that explain about build a igx network in layers (access, distribution and core), what is the best design to the core (triangle, ...
I have a 1720 w WIC1ENET that was accessing an intermediate gateway via a Linksys to the final gateway on a leased Cisco 2600 router that gives ISP access to the internet. Ever since the intermediate Linksys was removed and the gateway and subnet ma...
where can i find specs for 1000basex gbics regarding maximum distances for smf and mmf all(in one location) i have read a couple of articles and have got diferring answers. i intend to use a couple of ws-c2924m-xl-en switches at gigabit speeds for po...
I have existed network: Internal router-->Pix firewall-->External router, with several dedicated routers directly connect into the Internal router. I want to add another router parallel to the External router to accommodate dedicated routers. My ques...
Hi,I implemented an ISDN solution between branch office and HQ.It doesn't work when initiate a connection from branch office to HQ while from another Branch office is ok by using the same router configuration.(Hint:the 2 routers are 3620 and 2611,r...
I am populating my environment with 3524's. Some have no config and others do from previous feeble attempts. Before I place a new config on a 3524 that already has one I perform an erase startup and then paste my config onto the switch. I have not...
Hi , I have a 1720 Router which is connected to a 3600 router vial leased line serial . I have also gone in for a ISDN on both the sides so that it can be configured as Backup.But the backup does not seem to work.When the serial goes down , the ISDN ...
I have some program users that are trying to sneak a router on my network. I need to know whether they can do this and it work without changing the core router. I'm new at routers, so if my terminology is incorrect, I apologize in advance.Senario:Rou...
Hi all,I have the following error message from the CWSI campus:The OSAgent could not locate the following object:repository id:IDL:AniCoreModule/AniServiceLogin:1:0objectname: AniServerJust wonder if I can reinstall CWSI Campus software over the exis...
