The max timeout is 300s for telnet and console login.Is there any way to increase the timeout/disable the timeout so that the session will retain forever?
One of my sysadmins created a loop on one of my 2948s. He daisy chained the ethernet console ports of a bunch of suns and patched the top and bottom machine to the 2948. The ports on the 2948 were all configured to portfast enabled. Yet somehow th...
Hi all,we have router Cisco 3660 and we observelast time high values of CPU on ourrouter. It happens only when we do backups. Maybe once per week.CPU rises up to 90 % and big traffic isonly on interfaces from and where arebackups transmited. From our...
Hello-I?ve been given a project to move all vlans from our Core 6509s to the DLs (3750s, etc. MLSs) in various closets, and have read two different ways of doing this: One way configures two redundant vlans on the Cores, each vlan including one of t...
hi all,i created an etherchannel on my 4507 leading to a 3750. i did it the way i always do that works. when i put a specific port into the channel, it goes into "suspended" line protocol. what does this mean?
Hi!I'm confused about the non-silent and silent option in the channel-group command.If both end are configured with silent submode and auto mode, will the channel be established? Will the channel be established if both end are configured as silent mo...
Hi, referred the cisco site for the difference between 2950/2960 & 500, but what makes the major difference between these, based on that i thought i will suggest the manangement, because i am planning to move from 2950 to 2960 or 500., thanks in adva...
Hi Expert,I'm having an ADSL (ATM) interface in my router, I'm using static public IP on my ADSL line.Here what I intend to do,Create a dialer interface for ADSL connection but instead of create static IP on my dialer interface, I'm ip unnumbered my ...
I have tried to configure the router for my home office use numerous times and now I have been locked out for the 100th time. PLEASE can you help to turn off all passwords passnames etc until I can configure the router. PLS HELP
Hi folks,I've a topology like that:customer: 3550aggregator: 4500backbone: 6500on 3550 and 6500 I work with DSCP values. Between 3550 and 4500, and 4500-6500, I've trunks. Normally the 4000 family creates the "internal DSCP" value for egress policies...
4 servers connected on Cat4506 left connection for unknown reason. However, the condition was resumed automatically after 2 seconds. What is the possible reason?2006 May 28 07:00:29 Bangkok +07:00 %ETHC-5-PORTFROMSTP:Port 3/43 left bridge port 3/4320...
