I have a 1800' run that works perfect with sx gbic's and a 1500' run that flaps and disables with lx and mode conditioing patch cords, anyone have any experience with lx gbic's and mode cond patch cords?
If I have Cisco Catalyst 6500 and sup I or sup II and I wanna upgrade Power supply from 1300 W. to 3000 W. or 4000 W. Are there any issues to change this power supply? I think there is no any issue but my customer need the document to suupport, maybe...
hi all,I'd like to configure a catalyst 6509 switch running catos 7.6 to use authentication local and create users with differente level of privilege.set localuser user cisco password cisco privilege 15set localuser authentication enableset authenti...
HiI have two sites connected link.now when i send ping with 300 byte from desktop then ping loss more then normal ping.now I want measure reliability , any option to calculate it .Thanksbiplob
Hi Guy,Would appreciate if you could provide some feedback for this setupNortel Switch(A)------>Cisco 3825 ^Nortel Switch(B)----------|Is that possible connecting 2 Nortel Switch(A) and Switch(B) with cisco 3825 load balance ...
AOA, I have 2950 switch, whenever i start to configure it through console, it show me IOS bootup upto this screen, then switch Hange, what is the soloution of this problem,### Message Display when boot ####Press RETURN to get started!00:00:15: PO...
Backgroup- we recently found some alarm info in Hp Openview that reported some server down and up(flapping)in a short time.These are in vlan11 in cisco 4507R,also these server has second net adapter to connect another vlan 9 in 4507R,We checked 4507 ...
I read description of leap-map under EIGRP stub on latest PACKET magazine.But I can't find any information about that which IOS version support it.any comments is appreciated!
Hi, I have set up a lab for hub and spoke F/R using multipoint. I have 3 routers Top, Middle (Hub) and bottom. I have configured 2 PVC's between Top/Middle and Bottom/Middle.I have got full connectivity between all routers, however, I have had to pl...
Can anyone please tell me how much I can summarize the 10.1.3.0/27 10.1.3.64/27 and 10.1.3.128/27 networks, I am using eigrp and want to summarize the best I can, would I just advertise the 10.1.3.0 network i eigrp, and could I summarize this down t...
