Hello!
Could anyone please explain me why I have this infinite cycling message:
Nested r4k_return_to_monitor call (442 times)
-Traceback= 0 60338694
Nested r4k_return_to_monitor call (443 times)
-Traceback= 0 60338694
I have these infinite cycling messages during boot-up on 7206VXR chassis with installed C7200-I/O-FE module and NPE-400 module.
I have no problem running 7206VXR chassis with installed C7200-I/O-FE module and NPE-150 module:
Router#show ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IS-M), Version 12.0(4)T, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 29-Apr-99 06:16 by kpma
Image text-base: 0x60008900, data-base: 0x60F3C000
ROM: System Bootstrap, Version 11.1(10) [dschwart 10], RELEASE SOFTWARE (fc1)
BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(2)XE2, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Router uptime is 0 minutes
System restarted by power-on
System image file is "slot0:c7200-is-mz.120-4.T"
cisco 7206VXR (NPE150) processor with 57344K/8192K bytes of memory.
R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
6 slot VXR midplane, Version 2.3
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
1 FastEthernet/IEEE 802.3 interface(s)
125K bytes of non-volatile configuration memory.
1024K bytes of packet SRAM memory.
16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Router#show diag
Slot 0:
Fast-ethernet on C7200 I/O card with MII or RJ45 port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 00:01:38 ago
EEPROM contents at hardware discovery:
Hardware revision 1.4 Board revision A0
Serial number 15314421 Part number 73-2956-06
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 83 01 04 00 E9 AD F5 49 0B 8C 06 00 00 00 00
0x30: 50 00 00 00 99 11 17 00 00 FF FF FF FF FF FF FF
Thank You in advance.
Sincerely, Victor
