Identify Supvis 5530 with console output

[rburkhard]

Hello,

I have two boards to check which modeltyp they are.

Had a look on cisco docs,found a table,not enough.

1.Board(customers board), labeled with WS-X5530, Supervisor EngineIII-NFFC. sho mod :

-----------

Console> (enable) sh mod 1

Mod Module-Name Ports Module-Type Model Serial-Num Status

--- ------------------- ----- --------------------- --------- --------- -------

1 0 Supervisor III WS-X5530 012106115 ok

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-90-ab-6e-c4-00 to 00-90-ab-6e-c7-ff 3.0 3.1.2 4.5(4)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC WS-F5521 0012105995 1.1

Console> (enable)

-----------

second (our)board, labeled with WS-X5530-E3, SupervisorIII-NFFC II.

sh mod :

Console> (enable) sh mod

Mod Module-Name Ports Module-Type Model Serial-Num Status

--- ------------------- ----- --------------------- --------- --------- -------

1 0 Supervisor III WS-X5530 012144740 ok

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-90-ab-6e-c4-00 to 00-90-ab-6e-c7-ff 3.5 5.1(2) 4.5(4)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC II WS-F5531 0012141584 1.0

Console> (enable)

Questions:

Which is the exactly Modelnumber for ordering each of this cards?

I don't find the combination for NFFC II and WS-F5521, as described in customers delivery notes.

Thanks for help

Ruedi

[Georg Pauwen]

Hello,

I think the NFFC II WS-F5521 is listed because this card is integrated into the Supervisor III.

So, you cannot individually order the NFFC II WS-F5521, as it is integrated into the Catalyst 5500/5000 Series Supervisor Engine III with NFFC II, which has part number WS-X5530-E3.

WS-X5530-E2 --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC

WS-X5530-E2= --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC (spare)

WS-X5530-E3 --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC II

WS-X5530-E3= --> Catalyst 5500/5000 Series Supervisor Engine III with NFFC II (spare)

Keep in mind that these are EOL/EOS products and cannot be ordered anymore:

End of Life of the Catalyst 5000 Family Supervisor Engine III with NFFC and Supervisor Engine III with NFFC II (WS-X5530-E2, WS-X5530-E3, WS-F5521=, WS-F5531=)

http://www.cisco.com/warp/public/cc/pd/si/casi/ca5000/prodlit/1034_pp.htm

Regards,

Georg

[rburkhard]

Hello George,

Thanks for explanations. But, could you explain me, if the following 'card'is a E3 or E3A? (The customer sent us this card and he want a E3A as spare.

Thanks and regards

Ruedi

-----------------------

Console> (enable) sh mod 1

Mod Module-Name Ports Module-Type Model Serial-Num Status

--- ------------------- ----- --------------------- --------- --------- -------

1 0 Supervisor III WS-X5530 012106115 ok

Mod MAC-Address(es) Hw Fw Sw

--- -------------------------------------- ------ ---------- -----------------

1 00-90-ab-6e-c4-00 to 00-90-ab-6e-c7-ff 3.0 3.1.2 4.5(4)

Mod Sub-Type Sub-Model Sub-Serial Sub-Hw

--- -------- --------- ---------- ------

1 NFFC WS-F5521 0012105995 1.1

Console> (enable)

-----------