09-07-2006 03:40 AM - edited 03-03-2019 04:51 AM
Hi,
We have a requirement to restrict the ingress bandwidth to 512 kbps on a fastethernet port in Cisco 2960 L2 switch. Would be helpful if somebody let me know at the earliest.
09-07-2006 04:14 AM
you can perform ingress and egress bandwidth allocation on the 2960.
please see the following link for 2960 bandwidth configuration: (ingress)
09-07-2006 11:08 PM
Hi,
Is there any way to restrict bandwidth as low as 256K on a fastethernet port on 2960?
Document says about restricting from a minimum of 1 Mbps and multiples of it.
Thanks,
09-08-2006 03:09 AM
Hii raj,
the basic l2 switches can only police in multiples of 1 M, for minute limiting u will have to use higher l3 3500 switches or u can use a router with an l2 switch creating encapsulation.
pls do rate the post.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide