Catalyst 3550 with version 12.1(13)EAç shows the message: 00:07:36: %FM-4-EXCESSSECONDARY: Secondary IP dwells than 8 addresses configured or n than 8 IP more secondary Vlan200
when paste a vlan configuration, but to configure command by command the message doesn't appear.
This is the configuration:
interface Vlan200
ip address 200.x.x.1 255.255.255.0 secondary
ip address 200.x.x.1 255.255.255.0 secondary
ip address 200.x.x.1 255.255.255.0 secondary
ip address 200.x.x.1 255.255.255.0 secondary
ip address 200.x.x.1 255.255.252.0 secondary
ip address 200.x.x.253 255.255.255.0 secondary
ip address 200.x.x.253 255.255.255.0 secondary
ip address 200.x.x.1 255.255.252.0 secondary
ip address 200.x.x.1 255.255.252.0 secondary
ip address 200.x.x.253 255.255.255.0 secondary
ip address 200.x.x.253 255.255.255.0 secondary
ip address 10.x.x.1 255.255.248.0 secondary
ip address 200.x.x.1 255.255.255.0 secondary
ip address 10.x.x.250 255.255.0.0
ip access-group 102 in
ip helper-address 192.168.216.125
no ip redirects
no ip unreachables
no ip proxy-arp
arp timeout 43200
standby ip 10.9.0.1
standby timers 5 15
standby priority 110
standby preempt
standby authentication vtr-200
standby 2 ip 200.x.x.1
standby 2 timers 5 15
standby 2 priority 110
standby 2 preempt
standby 2 authentication vtr-200
standby 3 ip 200.x.x.1
standby 3 timers 5 15
standby 3 priority 110
standby 3 preempt
standby 3 authentication vtr-200
standby 4 ip 200.x.x.1
standby 4 timers 5 15
standby 4 priority 110
standby 4 preempt
standby 4 authentication vtr-200
standby 5 ip 200.x.x.1
standby 5 timers 5 15
standby 5 priority 110
standby 5 preempt
standby 5 authentication vtr-200
standby 6 ip 200.x.x.1
standby 6 timers 5 15
standby 6 priority 110
standby 6 preempt
standby 6 authentication vtr-200
standby 7 ip 200.x.x.1
standby 7 timers 5 15
standby 7 priority 110
standby 7 preempt
standby 7 authentication vtr-200
standby 8 ip 200.x.x.1
standby 8 timers 5 15
standby 8 priority 110
standby 8 preempt
standby 8 authentication vtr-200
end