When you have shorter distances of SMF, you might need to insert an in-line optical attenuator in the link to avoid overloading the receiver:
Insert a 10-dB in-line optical attenuator between the fiber-optic cable plant and the receiving port on the WS-G5487 GBIC at each end of the link whenever the fiber-optic cable span is less than 15.5 miles (25 km).
Insert a 5-dB in-line optical attenuator between the fiber-optic cable plant and the receiving port on the WS-G5487 GBIC at each end of the link whenever the fiber-optic cable span is equal to or greater than 15.5 miles (25 km) and less than 31 miles (50 km).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.