12-14-2005 11:49 AM - edited 03-03-2019 01:08 AM
I currently have four Catalyst 2950C switches and one Catalyst 2970 switch. I would like to hook up my four 2950 switches via the FX ports to the mini-GBIC slots on the 2970.
Which mini-GBIC modules do I need for the 2970 to make this possible?
12-14-2005 12:32 PM
Unfortunately, I am 99% sure they do not make a mini-GBIC for 100FX connections. You would have to buy a third party transceiver to convert from fiber to copper and connect it to a copper 10/100 port on the 2970.
12-14-2005 02:11 PM
Post applicable port info from:
show interface capabilites
to see if the ports are capable of working with each other.
See example:
GigabitEthernet0/24
Model: WS-C2970G-24T-E
Type: 10/100/1000BaseTX
Speed: 10,100,1000,auto
Duplex: half,full,auto
You would want to look at the first few lines on each switch.
--
Joe
12-14-2005 05:18 PM
There are available 100FX SFPs available, however none are supported on the 2950. The GLC-GE-100FX= is supported on the 2970. See below for more info:
12-15-2005 07:16 AM
My mistake. I learned something.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: