Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

12012 software feature set

How do I find out whether the 12012 IOS supports Cisco IOS firewall. Or can someone tell me which release does.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Bronze

Re: 12012 software feature set

Hi Simon, are you talking about the GSR12012?

If so I don't think there is CBACS for that platform.

There is a feature for the 12000 called IP Receive ACL which may be of use though.

Check this link

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1829/products_feature_guide09186a00800a8531.html

HTH

Silver

Re: 12012 software feature set

The FW feature set does not currently appear to be supported on the 12012. Curent feature sets for the GSR are:

gsr-k3p-mz.120-25.S.bin - SERVICE PROVIDER/SECURED SHELL 56

gsr-k4p-mz.120-25.S.bin - SERVICE PROVIDER/SECURE SHELL 3DES

gsr-p-mz.120-25.S.bin - SERVICE PROVIDER

gsr-boot-mz.120-25.S.bin - BOOT IMAGE

c12k-fdiagsbflc-mz.120-25.S.bin - FIELD DIAGNOSTICS LINECARD IMAGE

7 REPLIES
New Member

Re: 12012 software feature set

maybe you can use software advisor in Tools and Utilities of TAC webpage to find out if the specified IOS has such features.

New Member

Re: 12012 software feature set

Thanks for the reply, but the reason I am asking is that I couldn't find anything using the TAC Tools.

Re: 12012 software feature set

simon,

i didnt see any reference to 12.0(12) ios in the cisco software center. Also an IP + FW feature set doesnt list 12.0(12). I would assume, cisco doesnt support this version of IOS itself, anymore.

try to upgrade to the next latest software version, after considering how much amount of ram/flash you have , and whether u r ready to upgrade flash/ram if needed.

Also you havent specified the router mode. Recommendation of ram and flash needed for an ios upgrade can be found out only if you specify the router model.

IP FW feature set (IP + IOS firewall), is supported on the 12.0, starting with 12.0.17a

HTH

New Member

Re: 12012 software feature set

Appologies, I was unclear in specifying that I am trying to find out whether an IOS providing the Cisco IOS Firewall Feature is avaliable for a 12012 router or 12000 series router.

Simon

Silver

Re: 12012 software feature set

The FW feature set does not currently appear to be supported on the 12012. Curent feature sets for the GSR are:

gsr-k3p-mz.120-25.S.bin - SERVICE PROVIDER/SECURED SHELL 56

gsr-k4p-mz.120-25.S.bin - SERVICE PROVIDER/SECURE SHELL 3DES

gsr-p-mz.120-25.S.bin - SERVICE PROVIDER

gsr-boot-mz.120-25.S.bin - BOOT IMAGE

c12k-fdiagsbflc-mz.120-25.S.bin - FIELD DIAGNOSTICS LINECARD IMAGE

New Member

Re: 12012 software feature set

Thanks, this confirms my findings that no no IOS exists for the GSR12000 series routers that supports Cisco IOS Firewall.

Bronze

Re: 12012 software feature set

Hi Simon, are you talking about the GSR12012?

If so I don't think there is CBACS for that platform.

There is a feature for the 12000 called IP Receive ACL which may be of use though.

Check this link

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1829/products_feature_guide09186a00800a8531.html

HTH

180
Views
4
Helpful
7
Replies
CreatePlease login to create content