11-24-2010 11:36 PM - edited 03-03-2019 06:08 AM
Hello Everyong,
I'm trying to create a port-channel on my cisco 12K router and getting this error message.
Could some explain to me why this isn't working?
12Kconfig)#interface GigabitEthernet5/1/0
12K(config-if)#channel-group 2
Error: not supported on GigabitEthernet5/1/0.
Please and Thank you
Solved! Go to Solution.
11-25-2010 01:49 AM
Hi,
We are running 12.0(32)SY4 whereas the supported platform for this as per document is 12.0(33)S.
thanks,
Vinay
______________
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
11-25-2010 01:19 AM
Hi,
i found one previous issue with the same error and it was found that LinkBundling on Engine 5 interfaces is supported from 33S release only.
More info:-
http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/lnkbndl.html#wp1279546
So this feature is supported in 33S.
thanks,
Vinay
11-25-2010 01:33 AM
Hello,
And thanks for the response, especially for the link.
However, I'm running:
Version 12.0(32)SY4
So it should be supported no?
11-25-2010 01:49 AM
Hi,
We are running 12.0(32)SY4 whereas the supported platform for this as per document is 12.0(33)S.
thanks,
Vinay
______________
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide