Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

16 port Analog Modem

I have oredered a 16 port analog modem module for my 3661 router. Do I need to also order a seperate software to enable the module to work or will the current IOS do.

This is the current IOS I got for my 3661 router.

ITC_Router_3660#sho ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3660-I-M), Version 12.2(5a), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2001 by cisco Systems, Inc.

Compiled Thu 04-Oct-01 22:21 by pwade

Image text-base: 0x600089C0, data-base: 0x60A60000

ROM: System Bootstrap, Version 12.0(6r)T, RELEASE SOFTWARE (fc1)

ITC_Router_3660 uptime is 23 weeks, 4 days, 11 hours, 28 minutes

System returned to ROM by power-on

System restarted at 21:47:10 UTC Wed Jul 17 2002

System image file is "flash:c3660-i-mz.122-5a.bin"

cisco 3660 (R527x) processor (revision 1.0) with 28672K/4096K bytes of memory.

Processor board ID JAB0549801G

R527x CPU at 225Mhz, Implementation 40, Rev 10.0, 2048KB L2 Cache

Bridging software.

X.25 software, Version 3.0.0.

3660 Chassis type: ENTERPRISE

1 FastEthernet/IEEE 802.3 interface(s)

8 Serial network interface(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: 16 port Analog Modem

The present 12.2(5a) should work fine for the NM-16AM module.

Also the NM-16AM is supported in all IOS feature sets

Thanks, Mak.

2 REPLIES
Silver

Re: 16 port Analog Modem

The present 12.2(5a) should work fine for the NM-16AM module.

Also the NM-16AM is supported in all IOS feature sets

Thanks, Mak.

New Member

Re: 16 port Analog Modem

Thank you so much for the prompt reply. That answer my question

regards

87
Views
0
Helpful
2
Replies
CreatePlease login to create content