Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1600 DHCP-server?

Hi!

How do I make this router become a DHCP-server? It seems that I need an IOS upgrade, right?

router#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 1600 Software (C1600-BNY-L), Version 11.2(16)P, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1998 by cisco Systems, Inc.

Compiled Mon 19-Oct-98 15:48 by pwade

Image text-base: 0x08022268, data-base: 0x02005000

ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

router uptime is 19 weeks, 4 hours, 51 minutes

System restarted by reload

System image file is "flash:c1600-bny-l_112-16.P", booted via flash

cisco 1601 (68360) processor (revision C) with 1536K/512K bytes of memory.

Processor board ID 09893056, with hardware revision 00000000

Bridging software.

X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.

Basic Rate ISDN software, Version 1.0.

1 Ethernet/IEEE 802.3 interface(s)

1 serial(sync/async) network interface(s)

1 ISDN Basic Rate interface(s)

System/IO memory with parity disabled

2048K bytes of DRAM onboard

System running from FLASH

8K bytes of non-volatile configuration memory.

4096K bytes of processor board PCMCIA flash (Read ONLY)

Configuration register is 0x2102

Thanks for your help!

Regards, Jimmy Larsson

1 REPLY
Cisco Employee

Re: 1600 DHCP-server?

The 1600 can be configured as IOS DHCP server. You need at least a 12.0.x"T" code. The "T" is important because this gives you the DHCP server functionality. Here is a link that explains how DHCP on a router works also a sample config.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120t/120t1/easyip2.htm

582
Views
0
Helpful
1
Replies