Hi!
How do I make this router become a DHCP-server? It seems that I need an IOS upgrade, right?
router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 1600 Software (C1600-BNY-L), Version 11.2(16)P, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Mon 19-Oct-98 15:48 by pwade
Image text-base: 0x08022268, data-base: 0x02005000
ROM: System Bootstrap, Version 11.1(10)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
router uptime is 19 weeks, 4 hours, 51 minutes
System restarted by reload
System image file is "flash:c1600-bny-l_112-16.P", booted via flash
cisco 1601 (68360) processor (revision C) with 1536K/512K bytes of memory.
Processor board ID 09893056, with hardware revision 00000000
Bridging software.
X.25 software, Version 2.0, NET2, BFE and GOSIP compliant.
Basic Rate ISDN software, Version 1.0.
1 Ethernet/IEEE 802.3 interface(s)
1 serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
System/IO memory with parity disabled
2048K bytes of DRAM onboard
System running from FLASH
8K bytes of non-volatile configuration memory.
4096K bytes of processor board PCMCIA flash (Read ONLY)
Configuration register is 0x2102
Thanks for your help!
Regards, Jimmy Larsson
