Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1605 configuration for use as DSL firewall

Is there a basic configuration for a 1605 to used as a firewall and pppoe. What info is needed from the ISP.

3 REPLIES
Cisco Employee

Re: 1605 configuration for use as DSL firewall

I think you are loking for 1605 as a ADSL PPPoE client with Firewall. Right?

1600 routers dosen't support WIC-1ADSL card which is required for DSL line. So you can't use 1600 routers for that.

However 1600 does support firewall with ios firewall featureset.

New Member

Re: 1605 configuration for use as DSL firewall

Yes an ADSL PPPoE client. I have a ISP supplied ADSL modem, it has a proprietary chip I am told. I have the IOS firewall feature installed.

Cisco Employee

Re: 1605 configuration for use as DSL firewall

So you need two eth interface on the 1605. one connects to ADSL modem and one connects to your internal LAN. We are talking about PPPoEoE.

Here is the url for config as PPPoE and explanation. Its for 1700 routers but the config will be the same. Not sure about 1600 will support that but you can try it.

http://www.cisco.com/warp/public/794/wic_1enet_natclient.html

Some likns on configuration for ios firewall

http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/firew_dg.htm

http://www.cisco.com/warp/public/cc/pd/iosw/prodlit/frwll_qa.htm

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/secur_c/scprt3/scfirewl.htm

98
Views
0
Helpful
3
Replies
CreatePlease to create content