Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

1720 Point to Point

i have private t1 connectin g two cites with 1720 routers. Upon running a large database app, the intermittently stops transmitting and the application times out. Here is how i conclude this I watch the link light on the computer as I run the app along with the link light on the router. There is plently of files to be transfered, but the lights stop? Any suggestions

thanks

Naresh

2 REPLIES
New Member

Re: 1720 Point to Point

If you're losing link, I would start checking the cabling. If the link is being lost on the WAN port only, contact your Telco Circuit provider and have them open a trouble ticket. It could be a problem with premises wiring.

New Member

Re: 1720 Point to Point

I have tested using a variety of methods. I have done extended over night pings and, they are no drops or lost packets. It seems to happen with this application only and very sporadically.

87
Views
0
Helpful
2
Replies