Hi ! I have one 1720 router. I use this router to connect to internet and i had configured this router as a firewall. I want to know if i can use this router to connect from home to my LAN behind the router , and how to do this.My connection to internet is via ISDN line.
I want to dial-up from home to that router; i have a modem ( normal - not ISDN ) at home which will dial the number of the ISDN line connected to the 1720 router; i will set my home computer with an ip address from the LAN range . All i want is that 1720 router to accept the call and to put me in the office network.
that is not possible because the wic-1b-s/t or u does not have an analog modem on board. You can do that using ISDN at home or adding an analog modem (on the AUX port) finally if you want, there is a way with the new win-2-am which is a wic having two analog modems on board and able to go up to v90.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...