Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

18 Port Digital Modem Network Module NM-18DM configuration

Hi.

I have the following problem.

We have ONE router 3640 with NM-1FE1CE1U= card.

Working in a HUB & Spoke Network (Point Multi Point).

But we need to provide support links.

To do this we buy another 3640 but now with

* TWO of - nonort F. Ether. 1Port Channelized E1/ ISDN- PRI Unbalanced NM-1FE1CE1U=

* ONE of - 18 Port Digital Modem Network Module NM-18DM=

The requirements are:

to provide load balancing in the remote branch with de PMP & the FrameRelay Links.

And also to have how a least option of backup (in the case of down of the PMP & the FR links at same time) dial-up of the remote offices to the corporate central.

In the remote offices we have Cisco1759-2V with

* ONE - VIC-2FXS

* TWO - WIC-1T

My main problem is that I never work with this card

NM-18DM

Somebody here has configured one of this???

Any help or suggestion is welcome...

Thanks.

1 REPLY
New Member

Re: 18 Port Digital Modem Network Module NM-18DM configuration

Try this link:

http://www.cisco.com/warp/public/471/bri_3640.html#configs

it covers a basic configuration.....hope this helps some...

262
Views
0
Helpful
1
Replies
CreatePlease login to create content