Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

1900 bandwidth utilisation

On the 1900(24port) when i set to utilastion always the 13th led glows. Number of leds between them donot glow always. So how to determine the utilisation.

2 REPLIES
New Member

Re: 1900 bandwidth utilisation

According to http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v67x/19icg67x/19icintr.htm#11641

utilization is shown as a “series of lit port status LEDs ending with a rapidly blinking one. Peak bandwidth is indicated by the right-most solidly lit LED.” So if JUST lamp 13 is lighting, there might be a problem with your firmware or hardware.

New Member

Re: 1900 bandwidth utilisation

Thank u

I guess it is the peak utilisation.

Can I reset it that indication, so that after network changes i could reobserve after few days

125
Views
0
Helpful
2
Replies
CreatePlease login to create content