That is all possible. One ISDN line consists of two independant 64kb channels that can be bundled for extra bandwidth. If this is not sufficient, you can add more links. Check the info about DDR (Dial on Demand Routing) at CCO for configuration tips.
I have the some question, but I want to know if 128 Kbps ISDN BRI into one BRI port can used the some dialer number with dialer profile or legacy profile. IN the theory with dialer profile I can configure, but I dialer the some number?.
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...