yesterday I tried to upgrade my 2501, 2502's flash memory from 8M to 16M. Looks it's working on 2501 when I upgraded it to 16M. But when I upgrade 2502 I met some problem. 2502 can't recognize those 2 SIMM 8M flash memory. It show flash space unknown... I have two 2502, the same problem. Any idea about this?
I'd try *all* the memory modules in the 2501 that worked, to make sure the modules themselves are good. Also take the modules out of the 2501 and try them in the 2502s to see if they work in the others.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...